Servo Motors

Approx. Rs 49,999 / EachGet Latest Price

We provide all Delta AC Drives, VFD’s,  Delta AC Servo Motors, Delta Rotary Optical Encoders, Delta Motion Control Network, Delta Programmable Logic Controller, Delta Human Machine Interfaces, Delta Text Panels, Delta Temperature Controllers, Delta Industrial Fieldbus Solutions, Delta Pressure Sensor, Delta Brushless DC Motors as well as Delta Brushless DC Drives.

FEATURES

The B series is a digital servo system with standard functions. It provides built-in Position / Speed / Torque control modes and supports pulse command input and analog signal control. Parameters editing and operation is done via an optional handheld digital keypad. The gain tuning function allows easy operation and the internal memory blocks shorten the parameters upload and download time. The B series is a cost-effective and satisfactory servo system that fills the most basic and functional requirements of industrial automation field.

SPECIFICATIONS

A wide power range: from 100W to 1.5kW, 1-phase or 3-phase; 2kW, 3-phase
Input power supply: AC 200V ~ 230V
Available motor capacity: from 100W to 2kW
Built-in Position / Speed / Torque control modes
Pulse commands and analog voltage signals are accessed via input / output interface – CN1.
D-sub connector is provided for no troublesome wiring and connection.
Convenient handheld digital keypad is helpful for parameters editing and operation.
Internal memory blocks stored in the handheld digital keypad allows the users to read and write the parameters of the servo drive.
Easy gain tuning is done via the handheld digital keypad or using Delta’s free Windows® based software where the user can store, teach, and monitor the operation of the servo system.
Modbus communication protocol is supported as standard. Communication Interface: RS-232 / RS-485

APPLICATIONS

Filling and bottling equipment, feeding machine, electro-discharge machine, lathe, printing equipment, crochet machine, carving machine

Additional Information:

• Minimum Order Quantity: 1 Each

Approx. Rs 22,999 / Piece(s)Get Latest Price

• Excellent performance
• Rigid construction
• High durability

• Strong overload: the instantaneous torque up to three times overload, effectively overcome inertia moment of inertia loads at the moment of starting
• Built-in mechanical resonance suppression function can effectively suppress the resonance phenomenon of mechanical structure
• Excellent high-speed reflect performance: speed response bandwidth is more than 650Hz, the speed is from -3000r/min to 3000r/min
• The acceleration time is just 6ms
• A full range of models are built-in braking unit and braking resistor
• 1 kw servo drive can be directly 380v power supply to save into line transformer, reduce program costs
• With automatic gain adjustment function that can be load inertia identification
• The debugging is more convenient

Specifications:

• Power supply: 380V
• Speed: -3000r/min to 3000r/min
• Speed response bandwidth: 650 Hz

Additional Information:

• Item Code: DB-100Series

Approx. Rs 29,999 / EachGet Latest Price

We provide all Delta AC Drives, VFD’s,  Delta AC Servo Motors, Delta Rotary Optical Encoders, Delta Motion Control Network, Delta Programmable Logic Controller, Delta Human Machine Interfaces, Delta Text Panels, Delta Temperature Controllers, Delta Industrial Fieldbus Solutions, Delta Pressure Sensor, Delta Brushless DC Motors as well as Delta Brushless DC Drives.

INTRODUCTION

The power rating of the ASDA-B2 series is offered from 0.1kW to 3kW. The superior properties of this series emphasize on “built-in generic functions for general-purpose applications” and “avoiding variable costs from mechatronics integration.” When Delta’s ASDA-B2 series is in use, the users can conveniently complete assembly, wiring and operation setups. In addition, in switching from other brands to Delta’s ASDA-B2 series, outstanding quality and features, and complete product lineup make the replacement easy and quick to achieve. Using Delta ASDA-B2 series, not only the wiring and operation becomes much easier, and the requirements of general-purpose machine tools for the market could be satisfied as well. Moreover, the customized solutions are available on request for different industries so that make ASDA-B2 series be widely popular and always in demand by the customers in the field of industrial automation.

FEATURES

High-resolution encoder with 17-bit (160,000 p/rev) is equipped as a standard feature which satisfies the application needs of high precision positioning control and stable rotation at low speed.

Satisfy High Precision Positioning Requirements
Support pulse input (up to 4Mbps) and analog voltage two kinds of command.
Built-in position, speed and torque three control modes (speed and torque mode could be controlled via internal parameters or analog voltage command).
There auto notch filters are provided to suppress the mechanical resonance automatically and make the system operate more smoothly.

Offer Easy-To-Install Solution for Simple Start-Up
Motor sizing software is offered for the customers to conduct the estimation of the equipment conveniently.
ASDA-Soft configuration software (tuning software) is provided for the customers to meet the performance requirements quickly.
Easy-to-use digital keypad is ideal for setting parameters and monitoring the servo drive and motor directly.
Servo motor provides brake, oil seal etc. optional configurations for the requirements of different applications.

Reduce Maintenance and Wiring Cost for Versatile Operation
Existing power cables and encoder cables for ASDA series could be used still. When upgrading, there is no need to purchase new accessories.
The control circuit and main power circuit is separated, safety is increased and maintenance is much easier.
400W and above servo drive is built-in with regenerative resistor, significantly save the wiring and cost.
Two analog input terminals (CN5) are provided, easily monitor and the status of the servo motor.

Approx. Rs 29,999 / EachGet Latest Price

We provide all Delta AC Drives, VFD’s,  Delta AC Servo Motors, Delta Rotary Optical Encoders, Delta Motion Control Network, Delta Programmable Logic Controller, Delta Human Machine Interfaces, Delta Text Panels, Delta Temperature Controllers, Delta Industrial Fieldbus Solutions, Delta Pressure Sensor, Delta Brushless DC Motors as well as Delta Brushless DC Drives.

FEATURES

Brushless DC Motors and Drives (BLDCM) is a kind of 3-phase induction synchronous motor of permanent magnets with brushless structure. It is compact size and light weight. By adopting electronic commutator, it makes lower mechanical/electrical noise and no high temperature and dust caused by friction. In addition, it won’t produce rotor loss due to low inertia of rotor and high-speed operation. Therefore, it saves energy during heavy-load operation and is higher performance than traditional motor. For the BLDC with new technology, it has high-torque output at low speed and self-protection for over-heat, over-current, phase loss and leakage current.

SPECIFICATIONS

Power range:250W
Speed range:600rpm
Square-wave PWM control mode, feedback signal of Hall sensor
Low temperature rise, high efficiency and energy saving
Compact size, space saving and easy installation
Easy maintenance, low noise and electromagnetic interference
Constant output torque for easy control
Its high efficiency is greater than the induction motor

APPLICATIONS

Elevator door, carriage door and automatic door

Approx. Rs 39,999 / EachGet Latest Price

We provide all Delta AC Drives, VFD’s,  Delta AC Servo Motors, Delta Rotary Optical Encoders, Delta Motion Control Network, Delta Programmable Logic Controller, Delta Human Machine Interfaces, Delta Text Panels, Delta Temperature Controllers, Delta Industrial Fieldbus Solutions, Delta Pressure Sensor, Delta Brushless DC Motors as well as Delta Brushless DC Drives.

FEATURES

The AB series is a high performance digital servo system with advanced functions and supports various motor options including low, medium and high inertia servo motors to meet different application needs. It offers many motion control functionalities for a wide range of industry and machine applications, as well as provided in the A series. In addition, the AB series implements Modbus communication protocol as a standard, to connect with Delta’s programmable logic controller (PLC) and human machine interface (HMI), and establish the advanced architecture of the communication control system. Major applications include a vast range of machine tools and processing machines for various industries.

SPECIFICATIONS

A wide power range: from 100W to 1.5kW, 1-phase or 3-phase; from 2kW to 3kW, 3-phase
Input power supply: from 100W to 400W, AC 100V ~ 115V; from 100W to 3kW, AC 200V ~ 230V
Frequency characteristics (Responsiveness): 450Hz
Incremental 2500ppr optical encoder
Built-in Position / Speed / Torque control modes
8 internal programmable registers (point-to-point position control)
Various internal control functions for a vast range of applications (as A series)
Different inertia motors, from 1000 r/min to 3000 r/min are connectable.
Brake, oil seal, etc. motor options are available for different kinds of application fileds.
Modbus communication protocol is supported as standard. Communication Interface: RS-232 / RS-485 / RS-422

APPLICATIONS

Cutter/Turret control of machine tool, X-Y table control, sealing machine, feeding machine, carving machine, lathe, high-speed winding machine, cutting applications, textile equipment.

Additional Information:

• Minimum Order Quantity: 1 Each

Approx. Rs 39,999 / Piece(s)Get Latest Price

We provide all Delta AC Drives, VFD’s,  Delta AC Servo Motors, Delta Rotary Optical Encoders, Delta Motion Control Network, Delta Programmable Logic Controller, Delta Human Machine Interfaces, Delta Text Panels, Delta Temperature Controllers, Delta Industrial Fieldbus Solutions, Delta Pressure Sensor, Delta Brushless DC Motors as well as Delta Brushless DC Drives.

FEATURES
The A+ series is a new type of omnibearing integrated servo system with advanced functions. It is able to combine with medium / high servo motors from 3kW to 7.5kW ( torque output from 19.1 N-M to 47.74 N-M) and is equipped with incremental 20-bit (1280000 ppr) optical encoder, providing more accurate positioning control for high-precision processing industries or the machine applications where high responsiveness and stiffness is needed to reject high torque disturbances. With A and AB series, Delta provide a complete servo product line (from 100W to 7.5kW) to fully support our customers’ needs and offer various options for high torque applications.

SPECIFICATIONS

A wide power range: from 4.5kW to 7.5kW, 3-phase
Input power supply: AC 200V ~ 230V
Frequency characteristics (Responsiveness): 550Hz
Incremental 20-bit (1280000 ppr) optical encoder
Medium / High inertia servo motors are available including: 3kW, 3.5kW, 4.5kW, 5.5kW, 7.5kW.
Max. input frequency: Line receiver 4Mbps for high-speed motion command.
Built-in Position / Speed / Torque control modes
8 internal programmable registers (point-to-point position control)
Various internal control functions for a vast range of applications (as A and AB series)
Modbus communication protocol is supported as standard. Communication Interface: RS-232 / RS-485 / RS-422

APPLICATIONS

Spring machine, bending machine, bending press, feeding machines, electric injection molding machine, double column type machining center, presses machine